Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.     

Anti-aging effects of caloric restriction: Involvement of neuroendocrine adaptation by peripheral signaling

Many hormonal signals from peripheral tissues contribute to the regulation of energy homeostasis and food intake. These regulators including leptin, insulin, and ghrelin, modulate the orexigenic and anorexigenic neuropeptide expression in hypothalamic nuclei. The anti-aging effects of caloric restriction have been explained from an evolutional viewpoint of the adaptive response of the neuroendocrine and metabolic response systems to maximize survival during periods of food shortage. In organisms, excess energy is stored in adipose tissues as a triglyceride preparation for such survival situations. Adipose tissue has recently been recognized as an endocrine organ, and leptin, as secreted by adipocyte, seems to be an especially important factor for the adaptive response to fasting and neuroendocrine alterations under caloric restriction. In this review, we discuss the potential involvement of neuroendocrine modulators in longevity and the anti-aging effects of caloric restriction.     

Visualization of TiO2 Reduction Behavior in Molten Salt Electrolysis

Metallurgical and Materials Transactions B - An in situ observation technique of the TiO2 interfacial behavior in molten LiCl-KCl electrolysis was developed. The variation of the thin TiO2...     

Practical BRDF reconstruction using reliable geometric regions from multi-view stereo

Computational Visual Media - In this paper, we present a practical method for reconstructing the bidirectional reflectance distribution function (BRDF) from multiple images of a real object...     

SnO-SnO2 modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature

Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in special environments at room temperature is essential.Herein,the nanocomposite combining SnO-SnO2 (p-n junction) and Ti3C2Tx MXene was successfully synthesized by a one-step hydrothermal method.Because of the existence of a small amount of oxygen during the hydrothermal conditions,part of the p-type SnO was oxidized to n-type SnO2,forming in-situ p-n junctions on the surface of SnO.The hamburger-like SnO-SnO2/Ti3C2Tx sensor exhibited improved acetone gas sensing response of 12.1 (Rg/Ra) at room temperature,which were nearly 11 and 4 times higher than those of pristine Ti3C2Tx and pristine SnO-SnO2,respectively.Moreover,it expressed a short recovery time (9 s) and outstanding reproducibility.Because of the different work functions,the Schottky barrier was formed between the SnO and the Ti3C2Tx nanosheets,acting as a hole accumulation layer (HALs) between Ti3C2Tx and tin oxides.Herein,the sensing mechanism based on the formation of hetero-junctions and high conductivity of the metallic phase of Ti3C2Tx MXene in SnO-SnO2/Ti3C2Tx sensors was discussed in detail.     

Dielectric‐Screening Reduction‐Induced Large Transport Gap in Suspended Sub‐10 nm Graphene Nanoribbon Functional Devices

The predicted quasiparticle energy gap of more than 1 eV in sub‐6 nm graphene nanoribbons (GNRs) is elusive, as it is strongly suppressed by the substrate dielectric screening. The number of techniques that can produce suspended high‐quality and electrically contacted GNRs is small. The helium ion beam milling technique is capable of achieving sub‐5 nm patterning; however, the functional device fabrication and the electrical characteristics are not yet reported. Here, the electrical transport measurement of suspended ≈6 nm wide mono‐ and bilayer GNR functional devices is reported, which are obtained through sub‐nanometer resolution helium ion beam milling with controlled total helium ion budget. The transport gap opening of 0.16–0.8 eV is observed at room temperature. The measured transport gap of the different edge orientated GNRs is in good agreement with first‐principles simulation results. The enhanced electron–electron interaction and reduced dielectric screening in the suspended quasi‐1D GNRs and anti‐ferromagnetic coupling between opposite edges in the zigzag GNRs substantiate the observed large transport gap.     

Local out-of-plane deformation of CFRP ablator subjected to rapid heating

This study investigates local out-of-plane deformation of a carbon fiber reinforced phenolic polymer ablator subjected to very rapid heating. Local out-of-plane deformation was measured using a three-dimensional digital image correlation technique at high temperatures. This was achieved by attaching high temperature resistant random patterns on the specimen surface using a ceramic bond. Additionally, blue filters intended for cutting strong infrared radiation from the specimen were also used. This study then discusses the mechanisms of the local out-of-plane deformation under rapid heating conditions in terms of carbonization, pyrolysis gas occurrence, gas pressure storage, and interlaminar debonding due to gas pressure.     

High-Performance Nonvolatile Organic Photonic Transistor Memory Devices using Conjugated Rod–Coil Materials as a Floating Gate

A novel approach for using conjugated rod–coil materials as a floating gate in the fabrication of nonvolatile photonic transistor memory devices, consisting of n-type Sol-PDI and p-type C10-DNTT, is presented. Sol-PDI and C10-DNTT are used as dual functions of charge-trapping (conjugated rod) and tunneling (insulating coil), while n-type BPE-PDI and p-type DNTT are employed as the corresponding transporting layers. By using the same conjugated rod in the memory layer and transporting channel with a self-assembled structure, both n-type and p-type memory devices exhibit a fast response, a high current contrast between “Photo-On” and “Electrical-Off” bistable states over 10⁵, and an extremely low programing driving force of 0.1 V. The fabricated photon-driven memory devices exhibit a quick response to different wavelengths of light and a broadband light response that highlight their promising potential for light-recorder and synaptic device applications.     

Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression

A unidirectional carbon fiber reinforced plastic (CFRP) was scanned by an X-ray computed tomography (CT) system. Based on the X-ray CT images, a three-dimensional model with random fiber waviness was developed. Each fiber location was identified in a sectional CT image. Subsequently, the relative displacement of fibers between adjacent sectional CT images was obtained with a digital image correlation method. This procedure was repeated to obtain fiber waviness along the axial direction. The constructed three-dimensional fiber model showed random waviness of each fiber in the unidirectional CFRP. Finite element analysis was performed using the three-dimensional model. Simulation results showed bending and twisting deformations coupled with axial contractions during axial compression, which developed due to fiber waviness. A reduction of the fiber directional Young’s modulus due to fiber random waviness was quantitatively evaluated.